Usage and dosage of scale inhibitors

Scale inhibitor HEDP is a commonly used chemical used for scale inhibition treatment of water pipes, boilers, and other equipment to ensure normal operation and extend service life. The usage and dosage of scale inhibitors depend on specific application scenarios and process requirements. Below is an introduction to the general usage and dosage.

Usage of scale inhibitor:

(1) During the cleaning and maintenance process, add the scale inhibitor to the cleaning or maintenance solution as required, stir evenly, and then use it;

(2) In systems such as boilers and water treatment, online addition is usually used to quantitatively add scale inhibitors to pipelines or equipment through chemical pumps and other devices, and mix them with water for recycling.

Dosage of scale inhibitor:

The dosage of scale inhibitors needs to be adjusted based on specific equipment types, water quality conditions, operating processes, and other factors. It is usually recommended to use within the concentration range of 0.5% -1.5%. It should be noted that the dosage of different types of scale inhibitors also varies. Therefore, before use, it is necessary to carefully read the product manual or consult the manufacturer's staff to ensure that the correct scale inhibitor and dosage are used.

In addition, during the use of scale inhibitors, it is necessary to wear personal protective equipment during operation, and immediately start the equipment for recycling after adding the scale inhibitor to prevent the scale inhibitor from settling and setting inside the equipment. At the same time, it is also necessary to regularly test water quality indicators and equipment conditions, evaluate and adjust the scale inhibition effect.