Usage and purpose of circulating water treatment chemicals

The circulating water treatment agent is used to treat water quality issues in the circulating water system, in order to maintain the normal operation and stable water quality of the circulating water system. Its usage and purpose are as follows:

Usage:

Dosage control: Based on the water quality status and treatment objectives of the circulating water system, determine the appropriate dosage of the agent according to the instructions provided by the agent supplier.

Uniform mixing: evenly add the agent to the circulating water system and fully mix the agent with the circulating water through stirring or the flow of the circulating system itself.

Reagent supplementation: Over time, reagents may be consumed or degraded, and it is necessary to regularly monitor the water quality of the circulating water and supplement appropriate reagents according to the situation.

Common uses:

Corrosion inhibition: Dissolved oxygen, ions, and other substances in circulating water can cause corrosion of metal pipelines and equipment. The use of corrosion inhibitors can form a protective film and reduce the corrosion rate of metals.

Anti scaling and anti scaling: Hardness substances in water (such as calcium, magnesium salts, etc.) can scale in the circulating water system, hindering the heat exchange effect. Antiscale agents can prevent the formation of scale mats by inhibiting crystallization and dissolving the scale layer.

Sterilization and disinfection: Microorganisms (such as bacteria and algae) often grow in circulating water. The use of fungicides can effectively control the proliferation of microorganisms and prevent system blockage and pollution.

Discoloration and deodorization: Circulating water may have colors and odors, and the use of decolorizing and deodorizing agents can purify water quality, improve its appearance and comfort.

Suspended solids removal: Suspended solids (such as sediment and particles) in circulating water can cause blockage of pipelines and equipment. The use of suspended solids removers can help remove suspended solids and maintain good water flow patency.

When using circulating water treatment chemicals, it is necessary to select the appropriate type and dosage of chemicals based on the specific situation of the circulating water system and water quality analysis results. At the same time, regularly monitor the water quality and make necessary adjustments to ensure the stable operation of the circulating water system and qualified water quality.