Usage method of Youlujing disinfectant

Youlujing is a commonly used disinfectant, mainly composed of chlorinated compounds such as sodium hypochlorite (NaClO) or calcium hypochlorite (Ca (ClO) 2). The following is the general usage method of Youlujing:

Preparation: Before using Euchlor, make sure to wear appropriate personal protective equipment, such as gloves and goggles. At the same time, remove debris and dirt from the area to be disinfected to ensure effective disinfection.

Dilute Youlujing: Dilute Youlujing to an appropriate concentration according to the instructions in the product manual. Different application scenarios may require different concentrations, so it is important to carefully read the instructions and follow the instructions for dilution.

Clean the surface: Before using Euchlor, clean the surface or object to be disinfected with clean water to remove impurities and dirt.

Application of Euchlor: Spray or apply the diluted Euchlor solution evenly on the surface to be disinfected, ensuring coverage of the entire area. If it is a disinfectant item, it can be soaked in a solution of Euchlor for a period of time.

Contact time: According to the product instructions, allow the solution of Euchlor to remain on the surface for a certain period of time to ensure sufficient disinfection effect. Different bacteria or viruses may require different contact times, so please read the product instructions carefully.

Cleaning and rinsing: After the end of the contact time, thoroughly rinse the disinfected surface or item with clean water to remove residual chlorpyrifos and disinfectant substances.

It should be noted that when using Euchlor, the correct concentration and usage method should be followed to ensure safe and effective disinfection effect. At the same time, attention should be paid to avoiding mixing with other chemical substances to avoid harmful chemical reactions. During use, please ensure good ventilation and follow the product manual and relevant safety operating procedures.