Pickling Corrosion Inhibitor Fog Suppressor Testing Standard

The testing standards for pickling corrosion inhibitor and fog suppressor can vary depending on the specific product and industry. However, there are some commonly used testing standards that apply to these types of additives. Here are a few examples:

1.ASTM D130- Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test: This test method determines the corrosiveness of petroleum products, including corrosion inhibitors, towards copper. It involves exposing a copper strip to the product under controlled conditions and assessing the extent of corrosion.

2.ASTM G31- Standard Guide for Laboratory Immersion Corrosion Testing of Metals: This standard provides guidelines for conducting laboratory immersion tests to evaluate the corrosion resistance of metals, including the effects of corrosion inhibitors. It covers various test methods, such as weight loss measurements, visual examination, and electrochemical techniques.

3.NACE TM0172- Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments: This NACE (National Association of Corrosion Engineers) standard focuses on testing metals for their resistance to sulfide stress cracking and stress corrosion cracking in hydrogen sulfide (H2S) environments. It is relevant for pickling corrosion inhibitors used in sour gas environments.

4.ASTM D1353- Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products: This test method determines the nonvolatile matter content in volatile solvents used in paint, varnish, lacquer, and related products. It can be applicable when testing fog suppressors to determine the composition of nonvolatile components.

These are just a few examples, and there may be additional testing standards specific to certain industries or applications. It is recommended to consult the relevant industry standards organizations, such as ASTM International or NACE, for specific testing standards applicable to the pickling corrosion inhibitor and fog suppressor being used. Additionally, manufacturers of these additives may also provide guidance on testing methods and standards to evaluate their performance.