How to use pooltime algaecide?

Using Pooltime Algaecide is straightforward and can help prevent and treat algae in your swimming pool. Follow these steps for effective use:

1. Preparation

Check pool water balance:

Ensure pH is between 7.2 and 7.6.

Adjust alkalinity and chlorine levels as per pool guidelines.

Clean the pool:

Remove debris and brush pool walls to dislodge algae for better treatment.

2. Dosage

Preventative treatment:

Add 4-6 ounces per 10,000 gallons of pool water weekly to prevent algae growth.

Treatment for visible algae:

Add 16 ounces per 10,000 gallons directly to the pool for visible algae blooms.

3. Application

Dilute if necessary:

For better distribution, dilute the algaecide in a bucket of water before adding it to the pool.

Avoid mixing with other chemicals.

Distribute evenly:

Pour the algaecide solution around the edges of the pool while the pump and filter are running to ensure circulation.

Focus on affected areas:

For algae blooms, pour extra algaecide near problem spots.

4. After Application

Run the pump and filter system:

Operate the filtration system for 24 hours to circulate the algaecide.

Brush pool surfaces:

Scrub any remaining algae spots after applying the algaecide.

Recheck water chemistry:

Test and rebalance pH, chlorine, and alkalinity if needed.

5. Maintenance

Use Pooltime Algaecide regularly as part of your weekly pool maintenance routine to prevent future algae growth.

Safety Tips

Avoid overuse: Too much algaecide can cause foaming in the pool.

Keep away from children and pets: Store in a secure, dry location.

Follow label instructions: Always refer to the product's specific instructions for details.

By following these steps, you can effectively prevent and treat algae in your pool, keeping the water clean and safe for swimming.